IFC building model
Schema: "IFC2X3"
Description: "ViewDefinition [DesignTransferView_V1.0]"
File name: "pb_884_bim.ifc"
Time stamp: "2025-07-09T11:53:11"
Author: "mikkeln"
Organization: "BIMDeX"
Preprocessor: "BIMDeX 25.0.0.2"
Originating system: "BIMDeX"
Application: "Creo Parametric 10.0.3.0" version "10.0.3.0" identifier "Creo" by Organization "BIMDeX"

People and organizations
  Person "mikkeln" of Organization "BIMDeX"
  Owner history of Person "mikkeln" of Organization "BIMDeX" | application "Creo Parametric 10.0.3.0" version "10.0.3.0" identifier "Creo" by Organization "BIMDeX" | change ADDED | created 0 (1970-01-01T00:00:00Z) | last modified 1752061993 (2025-07-09T11:53:13Z)

Units
  LENGTHUNIT: MILLI METRE
  AREAUNIT: SQUARE_METRE
  SOLIDANGLEUNIT: STERADIAN
  PLANEANGLEUNIT: RADIAN
  TIMEUNIT: SECOND
  THERMODYNAMICTEMPERATUREUNIT: DEGREE_CELSIUS
  LUMINOUSINTENSITYUNIT: LUMEN
  MASSUNIT: KILO GRAM
  VOLUMEUNIT: CUBIC_METRE
  MASSDENSITYUNIT: derived

Spatial structure
IFCPROJECT "Default Project" | phase "Project Status" | description "Description of Default Project"
  IFCSITE "Default Site"
    IFCBUILDING "Default Building" | description "Description of Default Building"
      IFCBUILDINGSTOREY "Default Storey" | description "Description of Default Building Storey"
        contains 4 elements
          3 x IFCELEMENTASSEMBLY | object type "General" | names: "HR_120", "HO_2576", "HB_416" | parts: 5 IFCFLOWTERMINAL, 3 IFCBUILDINGELEMENTPROXY, 2 IFCPLATE | property sets: PTC_Identity Data
          1 x IFCBUILDINGELEMENTPROXY | object type "General" | names: "H1_0633_900" | property sets: PTC_Identity Data

Property sets
  PTC_Identity Data | properties | on 2 objects (2 IFCBUILDINGELEMENTPROXY)
    AREAL = 0.000483062 (IFCREAL)
    PTC_MASTER_MATERIAL = "PTC_SYSTEM_MTRL_PROPS" (IFCTEXT)
    PTC_MATERIAL_NAME = "" (IFCTEXT)
    PTC_REPORTED_MATERIAL = "" (IFCTEXT)
    VARETEKST = "M4 popnut - SEKSKANTET" (IFCTEXT)
    VGT = 0.002 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCPROJECT)
    AREAL = 0.415411 (IFCREAL)
    DESCRIPTION = "PB_884_BIM" (IFCTEXT)
    MODELED_BY = "" (IFCTEXT)
    PSET_DISCHARGE_DIAMETER = 50. (IFCREAL)
    PSET_DISCHARGE_DIRECTION = "Vertical" (IFCTEXT)
    PSET_DISCHARGE_LOCATION = "End" (IFCTEXT)
    PSET_FRAME_SHAPE = "Rectangular" (IFCTEXT)
    PSET_MATERIAL_EN = "EN 1.4301" (IFCTEXT)
    PSET_MATERIAL_MATERIAL = "AISI 304" (IFCTEXT)
    PSET_MEMBRAN_TYPE = "Lubricating membran" (IFCTEXT)
    PSET_PRODUCT = "50x900" (IFCTEXT)
    VARETEKST = "Waterline Atlantis 900" (IFCTEXT)
    VGT = 1.791 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCELEMENTASSEMBLY)
    AREAL = 0.269973 (IFCREAL)
    VARETEKST = "Waterline underdel 900 mm 30,30,30,30" (IFCTEXT)
    VGT = 1.053 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCBUILDINGELEMENTPROXY)
    AREAL = 0.248479 (IFCREAL)
    PTC_MASTER_MATERIAL = "PTC_SYSTEM_MTRL_PROPS" (IFCTEXT)
    PTC_MATERIAL_NAME = "" (IFCTEXT)
    PTC_REPORTED_MATERIAL = "" (IFCTEXT)
    SMT_DFLT_BEND_ANGLE = 90. (IFCREAL)
    SMT_DFLT_BEND_RADIUS = 1. (IFCREAL)
    SMT_DFLT_BEND_REL_ANGLE = 45. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH = 2. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH_TYPE = "Up to Bend" (IFCTEXT)
    SMT_DFLT_BEND_REL_LENGTH = 4. (IFCREAL)
    SMT_DFLT_BEND_REL_LENGTH_TYPE = "Through All" (IFCTEXT)
    SMT_DFLT_BEND_REL_TYPE = "Rip" (IFCTEXT)
    SMT_DFLT_BEND_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH_TYPE = "Blind" (IFCTEXT)
    SMT_DFLT_CRNR_REL_TYPE = "V Notch" (IFCTEXT)
    SMT_DFLT_CRNR_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_EDGE_TREA_TYPE = "Open" (IFCTEXT)
    SMT_DFLT_EDGE_TREA_WIDTH = -0.5 (IFCREAL)
    SMT_DFLT_MITER_CUT_OFFSET = 1.1 (IFCREAL)
    SMT_DFLT_MITER_CUT_WIDTH = 0.5 (IFCREAL)
    SMT_DFLT_RADIUS_SIDE = "Inside" (IFCTEXT)
    SMT_GAP = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOWANCE_FACTOR = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOW_FACTOR_TYPE = "Y FACTOR" (IFCTEXT)
    SMT_PART_BEND_TABLE_NAME = "" (IFCTEXT)
    SMT_THICKNESS = 1. (IFCREAL)
    SMT_UPDATE_BEND_ALLOW_INFO = FALSE (IFCBOOLEAN)
    U_REV = "_" (IFCTEXT)
    VARETEKST = "Rende f/flange-rende" (IFCTEXT)
    VGT = 0.971 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCPLATE)
    AREAL = 0.00610751 (IFCREAL)
    PTC_MASTER_MATERIAL = "PTC_SYSTEM_MTRL_PROPS" (IFCTEXT)
    PTC_MATERIAL_NAME = "" (IFCTEXT)
    PTC_REPORTED_MATERIAL = "" (IFCTEXT)
    SMT_DFLT_BEND_ANGLE = 90. (IFCREAL)
    SMT_DFLT_BEND_RADIUS = 1. (IFCREAL)
    SMT_DFLT_BEND_REL_ANGLE = 45. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH = 2. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH_TYPE = "Up to Bend" (IFCTEXT)
    SMT_DFLT_BEND_REL_LENGTH = 4. (IFCREAL)
    SMT_DFLT_BEND_REL_LENGTH_TYPE = "Through All" (IFCTEXT)
    SMT_DFLT_BEND_REL_TYPE = "Rip" (IFCTEXT)
    SMT_DFLT_BEND_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH_TYPE = "Blind" (IFCTEXT)
    SMT_DFLT_CRNR_REL_TYPE = "V Notch" (IFCTEXT)
    SMT_DFLT_CRNR_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_EDGE_TREA_TYPE = "Open" (IFCTEXT)
    SMT_DFLT_EDGE_TREA_WIDTH = -0.5 (IFCREAL)
    SMT_DFLT_MITER_CUT_OFFSET = 1.1 (IFCREAL)
    SMT_DFLT_MITER_CUT_WIDTH = 0.5 (IFCREAL)
    SMT_DFLT_RADIUS_SIDE = "Inside" (IFCTEXT)
    SMT_GAP = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOWANCE_FACTOR = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOW_FACTOR_TYPE = "Y FACTOR" (IFCTEXT)
    SMT_PART_BEND_TABLE_NAME = "" (IFCTEXT)
    SMT_THICKNESS = 1. (IFCREAL)
    SMT_UPDATE_BEND_ALLOW_INFO = FALSE (IFCBOOLEAN)
    VARETEKST = "Endeplade f/ flange-rende" (IFCTEXT)
    VGT = 0.023 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCPLATE)
    AREAL = 0.00491751 (IFCREAL)
    PTC_MASTER_MATERIAL = "PTC_SYSTEM_MTRL_PROPS" (IFCTEXT)
    PTC_MATERIAL_NAME = "" (IFCTEXT)
    PTC_REPORTED_MATERIAL = "" (IFCTEXT)
    SMT_DFLT_BEND_ANGLE = 90. (IFCREAL)
    SMT_DFLT_BEND_RADIUS = 1. (IFCREAL)
    SMT_DFLT_BEND_REL_ANGLE = 45. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH = 2. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH_TYPE = "Up to Bend" (IFCTEXT)
    SMT_DFLT_BEND_REL_LENGTH = 4. (IFCREAL)
    SMT_DFLT_BEND_REL_LENGTH_TYPE = "Through All" (IFCTEXT)
    SMT_DFLT_BEND_REL_TYPE = "Rip" (IFCTEXT)
    SMT_DFLT_BEND_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH_TYPE = "Blind" (IFCTEXT)
    SMT_DFLT_CRNR_REL_TYPE = "V Notch" (IFCTEXT)
    SMT_DFLT_CRNR_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_EDGE_TREA_TYPE = "Open" (IFCTEXT)
    SMT_DFLT_EDGE_TREA_WIDTH = -0.5 (IFCREAL)
    SMT_DFLT_MITER_CUT_OFFSET = 1.1 (IFCREAL)
    SMT_DFLT_MITER_CUT_WIDTH = 0.5 (IFCREAL)
    SMT_DFLT_RADIUS_SIDE = "Inside" (IFCTEXT)
    SMT_GAP = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOWANCE_FACTOR = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOW_FACTOR_TYPE = "Y FACTOR" (IFCTEXT)
    SMT_PART_BEND_TABLE_NAME = "" (IFCTEXT)
    SMT_THICKNESS = 1. (IFCREAL)
    SMT_UPDATE_BEND_ALLOW_INFO = FALSE (IFCBOOLEAN)
    VARETEKST = "Endeplade f/ flange-rende" (IFCTEXT)
    VGT = 0.018 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCFLOWTERMINAL)
    AREAL = 0.00950333 (IFCREAL)
    PTC_MASTER_MATERIAL = "PTC_SYSTEM_MTRL_PROPS" (IFCTEXT)
    PTC_MATERIAL_NAME = "" (IFCTEXT)
    PTC_REPORTED_MATERIAL = "" (IFCTEXT)
    SMT_DFLT_BEND_ANGLE = 90. (IFCREAL)
    SMT_DFLT_BEND_RADIUS = 1. (IFCREAL)
    SMT_DFLT_BEND_REL_ANGLE = 45. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH = 2. (IFCREAL)
    SMT_DFLT_BEND_REL_DEPTH_TYPE = "Up to Bend" (IFCTEXT)
    SMT_DFLT_BEND_REL_LENGTH = 4. (IFCREAL)
    SMT_DFLT_BEND_REL_LENGTH_TYPE = "Through All" (IFCTEXT)
    SMT_DFLT_BEND_REL_TYPE = "Rip" (IFCTEXT)
    SMT_DFLT_BEND_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH = 1. (IFCREAL)
    SMT_DFLT_CRNR_REL_DEPTH_TYPE = "On Origin" (IFCTEXT)
    SMT_DFLT_CRNR_REL_TYPE = "V Notch" (IFCTEXT)
    SMT_DFLT_CRNR_REL_WIDTH = 1. (IFCREAL)
    SMT_DFLT_EDGE_TREA_TYPE = "Open" (IFCTEXT)
    SMT_DFLT_EDGE_TREA_WIDTH = -0.5 (IFCREAL)
    SMT_DFLT_MITER_CUT_OFFSET = 1.1 (IFCREAL)
    SMT_DFLT_MITER_CUT_WIDTH = 0.5 (IFCREAL)
    SMT_DFLT_RADIUS_SIDE = "Inside" (IFCTEXT)
    SMT_GAP = 0.5 (IFCREAL)
    SMT_PART_BEND_ALLOWANCE_FACTOR = 1.5708 (IFCREAL)
    SMT_PART_BEND_ALLOW_FACTOR_TYPE = "Y FACTOR" (IFCTEXT)
    SMT_PART_BEND_TABLE_NAME = "" (IFCTEXT)
    SMT_THICKNESS = 1. (IFCREAL)
    SMT_UPDATE_BEND_ALLOW_INFO = FALSE (IFCBOOLEAN)
    VARETEKST = "Ø56 udløb" (IFCTEXT)
    VGT = 0.036 (IFCREAL)
  PTC_Identity Data | properties | on 1 object (1 IFCELEMENTASSEMBLY)
    AREAL = 0.00206541 (IFCREAL)
    DESCRIPTION = "HO_2576" (IFCTEXT)
    MODELED_BY = "" (IFCTEXT)
    VARETEKST = "Afstandsring til Waterline Atlantis - BEJDSET" (IFCTEXT)
    VGT = 0.009 (IFCREAL)
  PTC_Identity Data: 6 more contents on 6 objects not shown